• Based on the traditional art of creating tsuma and katsura maki, the HNK-25 cuts vegetables along the radial surface, creating perfectly sliced long, thin sheets, or noodle shape.

  • Latest development of kinpira cutter. Best suited for supermarket, lunch cater shops.

  • A combination of the cutter and regulating plate. Will cut 3kgs. per minute.

  • An all-around cutter for restaurants with the wide slit and blade disk of high-speed rotation.

  • Perfectly ideal for long stemmed vegetables, the OHC-50A slices through bunches of long stalks in less than one minute.

  • The perfect cabbage slicing machine. After loading and turning on, the cabbage will automatically be fed into the machine.

  • A high speed grade-up cabbage slicer equipped with a drum that can slice 4-5 heads of cabbages per each time.

  • Highly recommended for slicing all varieties of onion/leek as well as root vegetables and fruits.

BACK

VEGETABLE SLICERS

JUMBO CABBETSU
MODEL: DRC-80A

This is a high speed grade-up cabbage slicer of model RCS-60A which equipped with a drum that can slice 4~5 heads of cabbages per each time. The cutting blade is 170mm and durable for long hour use. Slice thickness: 0~5mm. Cutting time: 12kgs. per 10 mins. (Approximately 15hds.)



OPTIONAL DRC-80A Onion Attachment Directions
How to Attach
  1. Turn off power, unplug power cord from outlet, and make sure the unit is not moving.
  2. As demonstrated in the picture, with the attachment’s “teeth” facing up and with the flat sides parallel to the user, use both hands and slowly lower the attachment into the machine.
  3. Using both hands, lightly press on the attachment so as to completely insert it into the feeding hole of the unit. Do not use more pressure than necessary to accomplish this task.
  4. Insert completely until the “teeth” hit the top of the drum stopping it from going in any further. When inserting, make sure the attachment does not go in diagonally. When the attachment is inserted, it makes the machine unstable. Be sure to always use two attachments to avoid any instability while in use.
How to Remove
  1. Turn off power, unplug power cord from outlet, and make sure the unit is not moving.
  2. Insert your finger into the eyelet opening on the attachment. Pull straight up and remove.
How to Use the Onion Attachment
  1. Turn off power, unplug power cord from outlet, and make sure the unit is not moving.
  2. Trim the onion of its top and bottom ends. Peel. (The largest diameter of any onion that can be accommodated is 4.13 inches * 6 and 3.54 inches on either sides of the attachment.)
  3. Putting the cut side down, begin filling in both sides of the attachment with onions. Never place onions in the machine higher than the height of the drum. Doing to will result in machine malfunction and personal injury.
  4. Adjust the thickness of your onions to your desire. Plug in the machine. Begin to process by switching the machine to “on.”
  5. When the onions have reached a low level in the processor, stop the machine and reload. Continue the steps as described above until all onions have been processed. Caution: Never place onions in the machine while it is in use. Doing so will result in machine malfunction and personal injury.
How to Care for the Onion Attachment
  1. After removing, wash attachment with only nonabrasive detergents.
  2. After washing, wipe away any remaining moisture with a dry towel. 
    The attachment is dishwasher and boiling water-safe. Be careful not to get burned when using hot water.
SPECIFICATION
All units can cut any type of vegetable. However, for best results, it is recommended that the specific vegetable types indicated for each unit be used.
Model DRC-80A
Watts 125W
Weight 21.5 kgs
Dimensions W16.9" x L16.9" x H20.4" (W430 x L430 x H520mm)
Vegetable Type Spherical Leaf Structured
Approximate cutting time 10 mins / 15 cabbage heads
Slice Thickness 0-.19" (0-5mm)

*Price includes one year limited warranty. Tax applies only to purchasers within the states of CA and IL. *For more information, please contact us.